Multiport valves are called multiport valves because they have multiple ports inside the valve that allows the water to move in multiple directions. ... By changing the position of the lever, you can route the water coming from the pump around or through your filter in different way

Water is pulled from the pool by your pool pump and pushed into the “PUMP” port of the multiport valve where it enters the filter tank. ... After passing through the filter media, the water exits the tank again into the multiport valve, leaving through the “RETURN” port, and back to your pool.

front face with nominal Bore size 25-40-60 NB for backwash and rinse optional Mannual and automatic both of type

Cartridge filters are simple, modular filters that are inserted into a housing and can be used to remove particles, or sometime chemicals, from the water.

20" long 4" dia 5 micron spun filter for collecting dust / rust / and soildes of raw water above 5 micron

Cartridge filters can be composed of a number for materials. Some may be made from wound strands of a material such as polypropylene.

Reverse osmosis (RO) is a water purification process that uses a partially permeable membrane to remove ions, unwanted molecules and larger particles from drinking water. ...

BW series Membranes of TFC made with salt rejection ration of 99.7% flow rate per Membranes will be 1000 Ltr/hr

T.D.S rejection from raw water is 90 to 95 % maximum in standard test Parameter limit of TDS will be 2000 to 2500 ppm.

Dosing pumps are low-volume pumps with controllable discharge rates that are used to inject additives or difficult to mix fluids into mixing, pumping, or batch/tank systems. Dosing pumps are usually made from plastic, thermo plastic, and feature mounting holes or accessories. Single diaphragm models are available.

A High Pressure Switch (HPS) and a Low Pressure Switch (LPS) are protective devices for the compressor and refrigeration circuit. The high pressure switch monitors the system for an inoperative outdoor motor, and/or a dirty/restricted condenser (outdoor) coil. ... low pressure charge

A Low-pressure switch is connected to the suction, or “low” side of the system to sense suction pressure. When the pressure in the system exceeds the high pressure switch setting, the switch will open circuit the compressor clutch and the compressor will stop circulating refrigerant

O TO 5 K/G limit with heavy industrial switch